Rated 5 out of 5 byKomputr from nullThese print servers are easy to setup but unfortunately they have a high failure rate. We purchased 4 of them and 2 of those were replaced by DYMO tech support. One of those was replaced TWICE! We had two different issues with them. 1-It would drop off the network with no warning. 2-It would no longer recognize there was a printer connected to the USB port. We finally gave up after 4 months and installed a LabelWriter printer at each computer where it was needed. Luckily the printers are not too much more expensive than the print servers.
Date published: 2014-10-03T00:00:00-04:00
Rated 5 out of 5 byJosh3807 from nullThis server was extremely easy to set up and works without issue. Our users have always wanted a way they could all use the label printer without having to sit at a dedicated machine. Installed this, and now everyone in the area uses it.
Date published: 2014-08-04T00:00:00-04:00
Rated 5 out of 5 byITGUY67 from You CAN use this for larger networks. Connect via IP with a browser!The application to set the print servers up from DYMO only allows for IP address and subnet to be added to the device.However, if you log into the device via a browser and the IP address, you can then put in a gateway as well. You just have to get the DHCP address from the application in order to connect.I saw a couple of comments posted here about not working with larger environments and thought I would let everyone know this.All of ours went on the blink once for no reason. We had to factory reset them all. My hospital works with Athena and they primarily use DYMOs for their work flow.This print server was one of the ways to network them all at our site.Cheers!
Date published: 2016-10-31T00:00:00-04:00
Cette page a été imprimée le 01/06/2020 à 01:01:20 AM.