IOGEAR GWU637 IEEE 802.11n Wi-Fi Adapter
81,99 $
Mfg # GWU637
CDW # 4469109
Caractéristiques techniques en un clin d’œil
- Wirelessly connect Ethernet enabled devices to most Wi-Fi network
- Supports transfer speeds of up to 300Mbps on 2.4GHz networks
- Small form factor for ease of placement
- Supports WEP,WPA,WPA2,TKIP and AES encryption
- Turn legacy electronics into high-speed Wi-Fi enabled devices
- Compatible with 802.11b/g/n network standards
- Push-button Wi-Fi Protected Setup™ (WPS) simplifies secure connections to existing Wi-Fi networks
Connaître son équipement
Aucune description marketing n'est disponible.
Ajouter pour comparer
Enhance your purchase
IOGEAR Ethernet-2-WiFi Universal Wireless Transmitter - bridge - 802.11b/g/ is rated3.00 out of5 by2.
Rated 5 out of 5 byBadam from Works Great so farWe have this in place in several areas of our facility and so far (about 6months-1year) they have proven reliable. We have not had the frequent disconnect issues or firmware issues we had with other brands. Contrary to the other review we have not had to assign the end device with a static IP for it to pass traffic although we have done that one some devices just because they need that configuration.
Date published: 2018-05-30T00:00:00-04:00
Rated 5 out of 5 byckegn from Technically limitedI discovered through trial and error that the (wired) device you're trying to connect via this wireless adapter ** must have a statically-assigned IP address **. In other words, this IOGEAR wireless adapter *will not perform DHCP passthrough*. This was unfortunately a dealbreaker for us as the device we are connecting relies on a DHCP-assigned address and cannot be statically-assigned an IP. If you can statically assign your IP on the network you're connecting wirelessly to then this device works as advertised. It gets VERY warm after only 20 minutes of use. The setup is via very simple web interface. Login, connect to wifi, and that's about it.
Date published: 2017-12-28T00:00:00-05:00