Fluke Networks IntelliTone Pro 200 Kit - kit de test du réseau

N° de pièce fab. : MT-8200-60-KIT | N° de pièce CDW : 3474736 | UNSPSC : 43222643
Disponibilité : In Stock
Était 334,43 $
Prix annoncé
Détails du produit
  • Kit de test du réseau
Voir les détails du produit
Plus performants ensemble.
Fluke Networks IntelliTone Pro 200 Kit - kit de test du réseau
Aperçu rapide
Prix total :

Aperçu du produit

Caractéristiques principales
  • Kit de test du réseau
Bénéficiez d'une vision de pointe pour localiser de façon plus efficace les câbles enfouis dans les armoires de câblage, les commutateurs et les blocs de raccordement ou encore ceux cachés dans les faisceaux. Les kits de générateurs de tonalités et sondes IntelliTone Pro localisent les câbles là ou d'autres outils échouent.

IntelliTone Pro séries sont les premières gammes de générateurs de tonalité et de sondes à vous faire profiter de la signalisation numérique et analogique dans un seul outil. Autrement dit, elles sont équipées des technologies de localisation de câbles les plus puissantes pour répondre à tous les environnements de travail. Employez le mode numérique pour tracer et localiser des câblages de données sans risque et efficacement sur les réseaux actifs. Quant au mode analogique, utilisez-le pour identifier chaque paire de câblage et pour tracer les câbles VDI.
Fluke Networks IntelliTone Pro 200 Kit - network tester kit is rated4.33 out of5 by3.
Rated 5 out of 5 by from nullI haven't used this tone and probe kit to its full potential yet, so I'm only rating it based on the few scenarios that I've needed to use it. But so far it has been a little underwhelming. The cable map feature seemed to work pretty well. I was able to test the cables behind my walls and found one with a bad read on pin 3. All others tested out fine. The Locate feature I could not get to work consistently at all. To test, I chose a data port whose wiring I knew the exact location of and set the tone and probe to the Locate mode. I put the probe near the bundle of Cat5 and heard nothing. I stuck the probe tip down into the bundle where it should be right next to the actual wire I'm trying to locate and it did not tone out at all. However, I tested another cable in Locate mode that wasn't in the middle of a bundle of wires, and it worked if I passed the tip of the probe right over it. But that's not what Locate mode is supposed to be for. It's for finding the general bundle in which a particular cable might be in. The Isolate feature seemed to work, but was again underwhelming. Since I knew the exact wire it belonged to, I held the probe on that wire and waiting to see if it would do anything. It took maybe 3-4 seconds, but it eventually started to sing to me that it was the right wire. You cannot make quick passes over these cables and expect to hear the tone. I had to wait several seconds on each test to hear it. The quick start guide it comes with is vague and unclear. I had to search the web to find a full user manual with instructions on how it works. Even after reading that and verifying that I was doing everything according to the manual, it still didn't seem to work fully as advertised. Haven't had an opportunity to test coax cabling yet, so I have no information to provide there.
Date published: 2016-07-15T00:00:00-04:00
Rated 5 out of 5 by from nullNice, Simple, Reliable, and Effective. What more could a tech ask for. I liked it so much where I was before I bought one for myself so that I knew I had a quality tool.
Date published: 2016-08-10T00:00:00-04:00
Rated 5 out of 5 by from nullAwesome toner to work with. It does everything that I have ever needed and is so clear sounding and easy to use. Once you get the signal on the course setting, then move to the fine setting and you can even plug into the bottom and make sure you have the exact cable. Great product, easy price tag!!!
Date published: 2016-12-08T00:00:00-05:00
Powered by Translations.com GlobalLink OneLink Software