Avis

Solution TI

Solution TI

Solution TI

Logo de CDW

Eaton Tripp Lite Series SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet - rack - 6U

459,48 $
Économisez 166.49 $
292,99 $
Mfg # SRW6U CDW # 2126925

Caractéristiques techniques en un clin d’œil

  • 6U Wall-Mount Cabinet secures and organizes rack equipment in locations with limited floor space
  • Maximum load capacity of 200lbs
  • Flow-through ventilation keeps equipment cool
  • Mounts to wall or rolls on floor w/ SRCASTER (sold separatley)
  • Wallmount Rack Enclosure/ Wallmount Cabinet/ Rack Enclosure Cabinet/ Server Cabinet/ Wall Rack/ Wall Cabinet/ Server Racks
  • Locking steel cabinet vented at sides front top and bottom
  • Secures 6U of 19in rack equipment up to 16.5in deep
Voir tout Voir plus

Connaître son équipement

L'armoire rack à montage mural, profondeur de commutateur et profil compact 6U SmartRack SRW6U est conçue pour accueillir des équipements en rack 19 pouces à la norme EIA dans les armoires de câblage réseau, les emplacements de vente au détail, les salles de classe, les back offices et autres lieux avec un espace au sol limité où vos équipements doivent être sécurisés, organisés et à l'écart. Construite en acier robuste avec une finition à revêtement en poudre durable, l'armoire présente une capacité de charge maximale de 200 livres.

Les panneaux latéraux et la porte avant se verrouillent solidement pour contribuer à empêcher les dommages, le sabotage ou le vol. Les panneaux avant, haut, bas et latéraux amovibles sont ventilés, ce qui permet à l'air de circuler librement et de maintenir la température des équipements. La porte avant réversible peut s'ouvrir à gauche ou à droite en tournant l'armoire à 180° avant le montage. Les ports haut et bas pratiques facilitent le cheminement des câbles.
459,48 $
Économisez 166.49 $
292,99 $
Prix annoncé
Reviews
(30)
Disponibilité : 7 unités en stock
Expédié aujourd’hui même si commandé dans 1 heures 27 minutes
Ajouter pour comparer

Enhance your purchase

Accessories

Plus performants ensemble.

Article actuel
Eaton Tripp Lite Series SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet - rack - 6U

Cet article : Eaton Tripp Lite Series SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet - rack - 6U

292,99 $

Prix total :

Accessories

Disponible
Étagère en porte-à-faux fixe pour armoire de logement de bâti Tripp Lite, capacité 40 lb, 1URM
  • 1U cantilever mount fixed shelf that supports monitors and other equipment with a 40lb capacity
  • Compatible with 2 or 4 post rack enclosure cabinets
  • 12 inches in depth but can use two shelves back to back to create a deep fixed shelf in 2POST racks
Disponible
Ensemble ventilateur de refroidissement 120 V 5-15P pour dessus d’enceinte de bâti Tripp Lite
  • Increases airflow in wall-mount rack enclosures
  • Ideal for expelling heat through a roof mounted fan system
  • Features (2) 120V high-performance fans/ 3-ft. cord
Disponible
Tripp Lite Rack Enclosure Cabinet Square Hole Hardware Kit Screws Washers
  • SmartRack SRCAGENUTS is compatible with all square hole rack enclosure cabinets
  • Square hole hardware kit has 50 each M6 cage nuts and bolts to fasten equipment to square hole rackmount rails
  • Compatible with all square hole racks (EIA 310D)
Disponible
Tripp Lite Rack Enclosure Cabinet Mobile Rolling Caster Kit 2200lb Capacity
  • Rolling caster kit used to maneuver rack enclosures/ wall-mounts and 4 post open frame racks to their desired location
  • The kit includes 4 casters (550 lb per caster rating) installation guide and mounting hardware
  • Included with all floor-standing rack enclosure models (48/45/25/06/15U)
Article en attente
Tripp Lite Rack Enclosure Server Cabinet UPS Front Rail Mounting Bracket
  • Front Mount UPS support brackets for 2-post/ 4-post racks/ wall-mounts and enclosures
  • Allows 2U UPS systems to be mounted by the front vertical rails (No rear support needed)
  • Supports any 2U rackmount chassis up to 65 lbs
Disponible
Tripp Lite Environmental Sensor w/ Temp & Humidity Monitor & Digital Inputs
  • Environmental sensor module w/ digital outputs monitors temperature and humidity conditions as well as contact closures from alarm security and telecom products
  • temperature sensor/ temperature monitoring/ humidity sensor/ environtmental monitoring device/ envrionmental sensor
  • Easy magnetic mounting to most racks and cabinets

Reviews

4.7/5
30 Total

Reviews by Ratings

83%
10%
3%
3%
0%

1-8 of 30 reviews

Clear All Filters
By - Solution TI
Excellent rackmount
I installed at my home office. Put inside router and NVR Would have been great if we could put fans on the side.
By - Solution TI
The best
I use this to house a router and switch. Zero issues with it and it works great. It came put together which is a plus. Build quality is great and functions properly. Shipping was fast and the cabinet was packaged well. Definitely buy it again👍
By - Solution TI
Very good!
Very good!
By - Solution TI
We really like this rack!
We used this cabinet rack in a place where we didn"t have a closet. We got the white one which looks good where we put it. We really like it with all its features & versatility!
By - Solution TI
Very concise and manageable rack.
Great for those who are starting a small home network and need a spot for the equipment.
By - Solution TI
Easy to mount and easy to secure. Will buy again !
I purchase this for a IP camera security system in a remote construction job shack. 6U is the perfect size for what I need 1U NVR 1 5U UPC leaves plenty room for my AT&T LTE 4G router. Access panel top and bottom. With the side panels removable gives great access Easy to mount and easy to secure. Will buy again
By - Solution TI
Sturdy and Well-Ventilated
It's a well-built, wall-mounted rack that holds a switch and a small UPS easily.
By - Solution TI
Works fine
Does what it is designed to do.
Show 8 more reviews
Tripp Lite SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure is rated4.89 out of5 by9.
Rated 5 out of 5 by from Quick and EasyI was able to hang this unit by myself for an expansion to our network. This is a great unit and I will buy another for future expansions.
Date published: 2013-08-01T00:00:00-04:00
Rated 5 out of 5 by from Mixed resultsThe racks are solid and they function quite well, I've used these in the past and purchased 5 more recently. The screw kits that were included in these 5 were random, no two were a like. Some had the plastic spacers for all the screws while others had none or only a few, some had missing square mounts, one set had more screws in it than could fit in every single hole on both side while others didn't have enough for half. Some of the internal mounted blocks were twisted or severally damaged when installed and I was unable to reuse them. At least one of the enclosures the horizontal hole where the vertical pole was mounted had been rounded out by someone over torquing the screw to the point the square nut just spun in the square hole until it was round. I had to use vice grips and a drill to get them apart. Mounting these to a wall: A+ I like the top piece that goes onto the wall first and then you slide it over it. Space for UPS, switches and patch panels: A+ Just the right depth and width for what I needed Locking doors: A+ Unlike the previoius versions, there is only one key for this model which makes things more simple, previous had a seperate key for the side panels as where this has an internal latch that locks it shut and just the keyed door on the front. Ease of use: A+ Once you get the rails where you want and in the format you want (pre tapped holes or square holes for rackmount nuts) things just go together. All the doors come off for easy access from the front or two sides. Side doors are interchangable and don't require much clearance to remove unlike previous versions. Recommendation for easy install: Lay the rack on it's back, remove the front door and load everything you want in and screw it to the rails, much easier than trying to balance them horizontally, especially a UPS or other heavy equipment. Consistancy of included hardware: D- Read the top half about why. I would still recommend getting them, just be sure to buy your own screws and nuts or you may find yourself in a bind. Also, there is no wall mount hardware included, which for me isn't an issue as every wall is different but may frustrate some people who do not know it's not there.
Date published: 2014-02-24T00:00:00-05:00
Rated 5 out of 5 by from Sturdy and Well-VentilatedIt's a well-built, wall-mounted rack that holds a switch and a small UPS easily.
Date published: 2018-04-26T00:00:00-04:00
Rated 5 out of 5 by from Make sure that your UPS will fit in thisI purchased this unit only to find out that it's depth is too shallow to accommodate the Online UPS I had ordered also. It take a bit od sleuthing to determine the proper fit. Had I had known, I would have bought a deeper unit.
Date published: 2015-04-14T00:00:00-04:00
Rated 5 out of 5 by from Great little rackThis little rack is perfect for small servers. I have a HP DL320e blade server (1.7" (4.32cm) Height x 17.11" (43.46cm) Width x 15.07" (38.30cm) Length) and it fit. It was a little tight on the back end because of the power cable but it will work. Easy install and well built. Lots of ventilation. Will need to purchase exhaust fans and maybe a power strip made for it next.
Date published: 2016-03-31T00:00:00-04:00
Rated 5 out of 5 by from Excellent home network rackI bought this for my home network. I have a study/work room that I have my equipment located in and was looking for a small cabinet that could rack mount equipment. Although this unit is designed to go on the wall, it works perfectly on the floor. I mounted four small wheel casters on the bottom so that I could move it around. Solid construction, flexibility in opening the front, sides, and small outlets in back. Worth the buy.
Date published: 2013-03-04T00:00:00-05:00
Rated 5 out of 5 by from The Best One I've UsedThese cabinets are great. You can't beat the price at this quality. Side doors are convenient. I have been able to mount these to both a wall and a counter top. A great way to secure switches, and other small rack equipment around the office. I selected these mostly because of the great ventilation but was happy to find that they are also built well and sturdy.
Date published: 2015-09-03T00:00:00-04:00
Rated 5 out of 5 by from Excellent Network RackWe use this rack on all of our internal wiring projects that fit the bill under 6U. The additional fans are a nice touch. Very easy to run cables into this unit, and the mounting bracket makes for an easy installation - even when installing this box 20 feet above the ground.The front and side panels can be removed during the installation and are a nice touch to clean and secure everything inside.Very happy with this product.
Date published: 2014-07-21T00:00:00-04:00
Rated 5 out of 5 by from Works fineDoes what it is designed to do.
Date published: 2016-08-18T00:00:00-04:00
Rated 5 out of 5 by from Well made rack enclosureI have installed this unit in my new home - I have Cat6 from all rooms to into a patch bay in this rack unit. The quality of manufacture is first rate - thoughtful design features that are flexible for a range of uses. My only complaint is that it ships with 12 nuts/screws. This is a 6U unit and if you install 6 x 1U devices (switch, power supply etc) then you need 6 x 4 = 24 nuts/screws. Sure you can buy more screws but they tend to come in bags of 50. The screws are so cheap why not include 24 with the unit? Overall this unit is great and I would recommend.
Date published: 2012-11-18T00:00:00-05:00
Solution TI

Cette page a été imprimée le 14/03/2025 à 13:33:20.

Powered by Translations.com GlobalLink Web SoftwarePowered by GlobalLink Web